Workshop Tools

Adjustable Chain Anvil

This adjustable chain anvil is excellent for holding the chain while it is being broken to length with the chain breaker tool.

Suitable for all chain size & types.

Flywheel Removal Tool

Suits: Stihl 024, 026, 044, 064, 066, 084, 088, MS380, MS440, MS460, MS381, MS441, MS461, MS650, MS640, MS660, MS880

T27 Torx Screw Driver

These tools are great tools for carring out servicing and repairs for chainsaws.

All Stihl saws have screws with T27 Torx heads, which without the right tools can be hard to unscrew. This too...

Walbro Carburettor Metering Gauge Tool

This tool is used to measure the height of the needle valve control arm in the carburettor.

An essential tool for small engine carburettor servicing.

Suitable for all ...

Piston ring compressor tool kit

Fitting a new cylinder and piston can be a delicate operation and done with the right tools can lead to broken piston rings.

Make the job easy with this tool kit! This kit will comp...

Replacement Tip for Chain Breaker

Replacement tip for Oregon, Tecomec & Cannan bench mounted chain breaker tools.

Suitable for 1/4″, 3/8″ low profile, .325″, 3/8″ and .404″ chains

Piston Stop Tool

This tool is inserted into the spark plug hole in the top on the cylinder and it prevents the engine from rotating by stopping the piston movement.

This tool is required for removing the clutch an...

13mm x 19mm Combination Chainsaw Spanner

These tools are great tools for carrying out servicing and repairs for chainsaws. The small hex is the right size for the bur nuts on all Husqvarna, Jonsered, Echo, Shindaiwa, Dol...

4 Pcs Chainsaw Tool Kit

Great tool kit for repairing and maintaining chainsaws.

Includes the following:

1 pcs 13mm x 19mm Combination wrench for bar nuts and Stihl, Husqvarna and most other chainsaws

Carburetor and Crankcase Pressure Gauge.

Essential tool for servicing carburettor and pressure testing 2-stroke engines

Carburettor Adjustment Tool.

Suits carburetors with the double 'D' tamper proof style screws.

Clutch removal tool

This three jaw tool is required for removing the clutch for selected model Husqvarna and Jonsered chainsaws.

The tool has a hex drive so it can be used with a 19mm spanner or socket.

Cha...

Clutch Removal Tool for Echo

Suits Echo CS-350TES, CS-360TES, CS-362TES

Echo part number: X640-000011

Rocker On / Off Switch

Suits Tecomec Super Jolly (early model)

Part number K00200157

Loctite 518 High Temp Silicone Gasket Maker

High temp RTV Silicone. Red in colour.

Excellent sealant suitable for use in all small engines where a gasket maker sealant is required,

20 oz / 6ml tube

Forester Seal Coated Starter Rope

Size #5 / 4.00mm

- Seal coasted for an easy glide
- Abrasion Resistant
- Soft and flexible
- Ends seal easily
- Static low stretch
- 200ft roll

Forester Seal Coated Starter Rope

Size #4.5 / 3.6mm

- Seal coasted for an easy glide
- Abrasion Resistant
- Soft and flexible
- Ends seal easily
- Static low stretch
- 200ft roll

Forester Seal Coated Starter Rope

Size #4 / 3.2mm

- Seal coasted for an easy glide
- Abrasion Resistant
- Soft and flexible
- Ends seal easily
- Static low stretch
- 200ft roll

Forester Seal Coated Starter Rope

Size #3.5 / 2.8mm

- Seal coasted for an easy glide
- Abrasion Resistant
- Soft and flexible
- Ends seal easily
- Static low stretch
- 200ft roll

Forester Seal Coated Starter Rope

Size #3 / 2.4mm

- Seal coasted for an easy glide
- Abrasion Resistant
- Soft and flexible
- Ends seal easily
- Static low stretch
- 200ft roll

Zama Carburettor Metering Gauge Tool

This tool is used to measure the height of the needle valve control arm in the carburettor.

An essential tool for small engine carburettor servicing.

Suitable for all mo...

Granberg Break n Mend Tool

For on-the-job chain repairs. Break and spin rivets on all common sizes of saw chain with Break-N-Mend's adjustable anvils and spinner heads. Easy to use and portable

Clutch Removal Tool -

This two pin tool is required for removing the clutch for selected model Husqvarna and Jonsered chainsaws.

The tool has a hex drive so it can be used with a spanner or socket.

Chainsa...

Crankcase Splitting Tool

This is a crankcase splitting used used to separate the crankcases on 2-stroke engines such as chainsaws, brushcutters and many other small 2-stroke engines.

Suitable for almost all chains...

In-Line Ignition Spark Tester

Excellent tool for diagnosing ignition problem on our small engines

Carburettor Tuning Tool Kit (10 pcs)

Now you can adjust those tamper-proof tuning screws!

This tool kit includes all the drivers to adjust the fuel mixture screws on all the late model carburettors fitted to the n...

Flywheel Removal Tool

Suits: Stihl 024, 026, 044, 066, MS380, MS440, MS460