Cycle Pro Spare Parts

  • Home
  • >>
  • Cycle Pro Spare Parts
Cycle Pro Front Sprocket - All Models

Cycle Pro Front Sprocket - All Models

CPSFRSP

Cycle Pro Front Sprocket Suits all models of Cycle Pro engines

$12.00
Cycle Pro Front Sprocket - All Models
Cycle Pro Front Sprocket - All Models
CPSFRSP

Cycle Pro Front Sprocket

Suits all models of Cycle Pro engines

$12.00
Clutch Rod Ball (8mm)

Clutch Rod Ball (8mm)

CPSCRB

Clutch Rod Ball (8mm)

$2.00
Clutch Rod Ball (8mm)
Clutch Rod Ball (8mm)
CPSCRB

Clutch Rod Ball (8mm)

$2.00
Crankshaft Oil Seal (flywheel side)

Crankshaft Oil Seal (flywheel side)

CPSCOS

Flywheel side oil seal Suits 50cc, 60cc and 70cc engines

$2.70
Crankshaft Oil Seal (flywheel side)
Crankshaft Oil Seal (flywheel side)
CPSCOS

Flywheel side oil seal

Suits 50cc, 60cc and 70cc engines

$2.70
Primary Ignition Coil

Primary Ignition Coil

CPSCI

This is the primary ignition coil. Fits all models.

$29.00
Primary Ignition Coil
Primary Ignition Coil
CPSCI

This is the primary ignition coil.
Fits all models.

$29.00
Cycle Pro Clutch Handle / Lever

Cycle Pro Clutch Handle / Lever

CPSCCH

Clutch Handle Suits all Cycle Pro models

$22.00
Cycle Pro Clutch Handle / Lever
Cycle Pro Clutch Handle / Lever
CPSCCH

Clutch Handle

Suits all Cycle Pro models

$22.00
Cycle Pro Clutch Cable

Cycle Pro Clutch Cable

CPSCC

Cycle Pro Clutch Cable Complete with springs and cable clamp

$14.00
Cycle Pro Clutch Cable
Cycle Pro Clutch Cable
CPSCC

Cycle Pro Clutch Cable

Complete with springs and cable clamp

$14.00
Cylinder Stud - 50cc, 60cc (6mm)

Cylinder Stud - 50cc, 60cc (6mm)

CPS50CYST

Cylinder Stud Suits 50cc and 60cc engine

$1.90
Cylinder Stud - 50cc, 60cc (6mm)
Cylinder Stud - 50cc, 60cc (6mm)
CPS50CYST

Cylinder Stud

Suits 50cc and 60cc engine

$1.90
Engine Mount Bracket - 6mm Studs

Engine Mount Bracket - 6mm Studs

CPREMC

Engine Mount Bracket Suits engines with 6mm studs

$3.00
Engine Mount Bracket - 6mm Studs
Engine Mount Bracket - 6mm Studs
CPREMC

Engine Mount Bracket

Suits engines with 6mm studs

$3.00
CPM Half Link

CPM Half Link

CPHL

Half Link Sometimes a half link is required to archive the correct chai...

$5.00
CPM Half Link
CPM Half Link
CPHL

Half Link

Sometimes a half link is required to archive the correct chain tension when there's no enough adjustment.

Suits 415 chains.

$5.00
CYCLE PRO CNS-R AIR FILTER ASSY

CYCLE PRO CNS-R AIR FILTER ASSY

CPCNSRAF

Air Filter Assy Suits engines with CNS-R Carburettor

$14.00
CYCLE PRO CNS-R AIR FILTER ASSY
CYCLE PRO CNS-R AIR FILTER ASSY
CPCNSRAF

Air Filter Assy

Suits engines with CNS-R Carburettor

$14.00
CPM 70cc Top End Rebuild Kit

CPM 70cc Top End Rebuild Kit

CP70TERK

This kit comes with the cylinder, piston, piston rings, cylinder head, s...

$85.00
CPM 70cc Top End Rebuild Kit
CPM 70cc Top End Rebuild Kit
CP70TERK

This kit comes with the cylinder, piston, piston rings, cylinder head, studs, gaskets etc.

Suits Road 70, Street 70 and Speed 70 engines

$85.00
CPM Performance Cylinder Head (70cc)

CPM Performance Cylinder Head (70cc)

CP-HPCH

CPM Performance Cylinder Head This is a high compression cylinder head ...

$89.00
CPM Performance Cylinder Head (70cc)
CPM Performance Cylinder Head (70cc)
CP-HPCH

CPM Performance Cylinder Head

This is a high compression cylinder head machine from a solid billet of aluminum.

Fitting this cylinder kit to an standard 70cc Cycle Pro engine gives a huge compression increase whic...

$89.00
CPM 70cc Top End Rebuild Kit (wide 40mm intake studs version)

CPM 70cc Top End Rebuild Kit (wide 40mm intake studs version)

CP70TERK/3

This kit comes with the cylinder, piston, piston rings and gaskets This...

$110.00
CPM 70cc Top End Rebuild Kit (wide 40mm intake studs version)
CPM 70cc Top End Rebuild Kit (wide 40mm intake studs version)
CP70TERK/3

This kit comes with the cylinder, piston, piston rings and gaskets

This is two piece cylinder version

Suits 70cc engine with 40mm pitch intake manifold studs

$110.00
Dual brake lever with independent cable adjusters

Dual brake lever with independent cable adjusters

CPDBLZ

Dual Brake Lever The dual brake lever can be used for operating both fr...

$35.00
Dual brake lever with independent cable adjusters
Dual brake lever with independent cable adjusters
CPDBLZ

Dual Brake Lever

The dual brake lever can be used for operating both front and rear brake with the same lever, so the left hand lever can be used for the clutch.

This handle has individual cable adjuster so you ca...

$35.00
Cycle Pro Clutch Cable (cable only, no springs or clamp)

Cycle Pro Clutch Cable (cable only, no springs or clamp)

CPSCC1

Cycle Pro Clutch Cable Cable only - no springs or cable clamp

$11.00
Cycle Pro Clutch Cable (cable only, no springs or clamp)
Cycle Pro Clutch Cable (cable only, no springs or clamp)
CPSCC1

Cycle Pro Clutch Cable

Cable only - no springs or cable clamp

$11.00
Phantom 85 Cylinder Only

Phantom 85 Cylinder Only

PH85C

Cylinder Only Suits the Phantom 85 engine. This is the new V3 cylinder...

$90.00
Phantom 85 Cylinder Only
Phantom 85 Cylinder Only
PH85C

Cylinder Only

Suits the Phantom 85 engine.

This is the new V3 cylinder kit.

$90.00
Piston & Ring Kit - Phantom 85

Piston & Ring Kit - Phantom 85

PH85PK

Piston Kit Complete with piston, piston rings, gudgeon pin and clips. ...

$59.00
Piston & Ring Kit - Phantom 85
Piston & Ring Kit - Phantom 85
PH85PK

Piston Kit

Complete with piston, piston rings, gudgeon pin and clips.

Suits the Phantom 85 engines

$59.00
Cylinder Base Gasket - Cycle Pro GT80

Cylinder Base Gasket - Cycle Pro GT80

GT80CBG

Cylinder Base Gasket Suits GT80 engines

$4.00
Cylinder Base Gasket - Cycle Pro GT80
Cylinder Base Gasket - Cycle Pro GT80
GT80CBG

Cylinder Base Gasket

Suits GT80 engines

$4.00
Ignition Cover Screw (4mm x 20mm)

Ignition Cover Screw (4mm x 20mm)

CPMCS

Ignition Cover Screw (4mm) Suits all engine models

$0.90
Ignition Cover Screw (4mm x 20mm)
Ignition Cover Screw (4mm x 20mm)
CPMCS

Ignition Cover Screw (4mm)

Suits all engine models

$0.90
Ignition Wire Grommet - Cycle Pro

Ignition Wire Grommet - Cycle Pro

CPIWG

Ignition Wire Grommet - Cycle Pro Suits all engine models

$3.00
Ignition Wire Grommet - Cycle Pro
Ignition Wire Grommet - Cycle Pro
CPIWG

Ignition Wire Grommet - Cycle Pro

Suits all engine models

$3.00
Woodruff Key 2.5mm

Woodruff Key 2.5mm

CPWK

Woodruff Key Width: 2.5mm

$1.50
Woodruff Key 2.5mm
Woodruff Key 2.5mm
CPWK

Woodruff Key

Width: 2.5mm

$1.50
CPM Cable Holder

CPM Cable Holder

CPWCH

CPM Cable Holder Suitable for all engine models

$3.50
CPM Cable Holder
CPM Cable Holder
CPWCH

CPM Cable Holder

Suitable for all engine models

$3.50
Front Engine Mount Adaptor (6mm)

Front Engine Mount Adaptor (6mm)

CPSUEM

Front Engine Mount Adaptor Suits all engines (6mm)

$10.00
Front Engine Mount Adaptor (6mm)
Front Engine Mount Adaptor (6mm)
CPSUEM

Front Engine Mount Adaptor

Suits all engines (6mm)

$10.00
Rear Sprocket - 48 Tooth

Rear Sprocket - 48 Tooth

CPSRESP48

Rear Sprocket, 48 Tooth This is a 48 tooth rear sprocket with a 9 hole ...

$29.00
Rear Sprocket - 48 Tooth
Rear Sprocket - 48 Tooth
CPSRESP48

Rear Sprocket, 48 Tooth

This is a 48 tooth rear sprocket with a 9 hole mounting pattern. Works with all models. Gives better take off and more power up hills, but does reduce the top speed.

This gives a speed of 4...

$29.00
Rear Sprocket - 44 Tooth

Rear Sprocket - 44 Tooth

CPSRESP

This is a 44 tooth rear sprocket with a 9 hole mounting pattern. Works w...

$25.00
Rear Sprocket - 44 Tooth
Rear Sprocket - 44 Tooth
CPSRESP

This is a 44 tooth rear sprocket with a 9 hole mounting pattern. Works with all models.

This gives a speed of 46 Km/h @ 6,000 r.p.m. with a 26″ rear wheel.

$25.00
CPM Fuel Tank (male thread)

CPM Fuel Tank (male thread)

CPSPFT

Cycle Pro Fuel Tank 1.5 Litre capacity Male thread

$39.00
CPM Fuel Tank (male thread)
CPM Fuel Tank (male thread)
CPSPFT

Cycle Pro Fuel Tank

1.5 Litre capacity

Male thread

$39.00
Engine Mount Bracket - 8mm Studs

Engine Mount Bracket - 8mm Studs

CPSPEMC

Engine Mount Bracket Suits engines with 8mm studs

$3.00
Engine Mount Bracket - 8mm Studs
Engine Mount Bracket - 8mm Studs
CPSPEMC

Engine Mount Bracket

Suits engines with 8mm studs

$3.00
Previous 1 2 3 4 … 7 Next

Filters

 

Manufacturers